HOME-12 Satellite Radio Indoor Dock
Mains cradle with a pair of 3-inch drivers, a line out, and an indoor aerial.
Shop › SR-220 Satellite Radio Vehicle Dock Kit
Dock-and-go receiver that lifts out in one movement and drops into the home cradle.
We check this against your vehicle before it ships. Add your year, make, model and trim at the basket and we will confirm it or call you.
Any vehicle. Choose a MNT-VNT or MNT-WSC mount if you would rather not adhere the disc to the dash.
Not every vehicle has a spare dash aperture, and cutting one into a modern moulded fascia is a decision you cannot reverse. The SR-220 avoids the question: the receiver lives in a cradle you mount where it suits you, and it lifts out with one hand when you park.
The cradle carries the aerial and power connections, so the loom stays put and the receiver is the only thing that travels. If you also buy the HOME-12 cradle, the same receiver moves between the car and the kitchen without re-pairing anything.
The face is deliberately plain. Four buttons, one screen, no menu tree three levels deep. Everything you need while driving is reachable without reading.
| Receiver size | 96 × 62 × 18 mm |
|---|---|
| Display | 2.4 in LCD |
| Cradle fitting | Vent, suction or screw-down |
| Aerial connector | SMB on cradle |
| Audio out | 3.5 mm + FM direct |
| Supply | 12 V via cradle |
| Identifier | On-screen, settings menu |
| Warranty | 24 months |
Not sure it suits your vehicle? Send the registration or the year, make, model and trim through the contact form and we will confirm before you order. There is no charge and no obligation.
Mains cradle with a pair of 3-inch drivers, a line out, and an indoor aerial.
Adhesive shark-fin aerial for vehicles where a magnet base is not an option.
Sprung vent clip with a ball joint, sized for blade vents between 4 mm and 9 mm.