HOME-12 Satellite Radio Indoor Dock
Mains cradle with a pair of 3-inch drivers, a line out, and an indoor aerial.
Shop › ANT-55 Satellite Radio Fin Aerial
Adhesive shark-fin aerial for vehicles where a magnet base is not an option.
We check this against your vehicle before it ships. Add your year, make, model and trim at the basket and we will confirm it or call you.
Any roof material. Not suitable for a roof you intend to re-sell unmarked — the tape leaves a residue outline.
The ANT-55 exists for two situations: roofs a magnet cannot hold, and drivers who do not want a puck and a trailing lead on show. It bonds with a pre-applied automotive acrylic tape rated for the same temperature range as factory trim, and once it is down it is down — treat placement as permanent.
Because it is taller than a puck, it clears a roof rail better and tolerates a roof box further back. It is the aerial we specify most often on vans, where the roof is long and the receiver ends up a long way from the aerial.
Fitting is straightforward but unforgiving of a cold or dirty surface. Above 15 °C, clean with the supplied wipe, press for thirty seconds, and leave it a full hour before driving.
| Fixing | Pre-applied acrylic tape |
|---|---|
| Lead | 5 m shielded coax |
| Terminal | SMB straight |
| Height | 42 mm |
| Colour | Satin black, paintable |
| Weather rating | IP68 |
| Warranty | 24 months |
Not sure it suits your vehicle? Send the registration or the year, make, model and trim through the contact form and we will confirm before you order. There is no charge and no obligation.
Mains cradle with a pair of 3-inch drivers, a line out, and an indoor aerial.
Sends receiver audio to a Bluetooth speaker, headset or a car stereo with BT input.
ISO-A / ISO-B harness with a labelled tail set. No cutting into the vehicle loom.